Thermal NIL Module

Thermal NIL is embossing into a thermoplastic material or thermoplastic coating. In this case the web material is typically heated up to 20-40 degrees above its Tg or glass transition temperature while a very large load, up to 5000 pounds, is applied to a pinch roller to flow the substrate into the features of relieved embossing roller. Then the material is cooled below the glass transition temperature by about 20 degrees and the material is stripped from the thermal embossing roller revealing the replicated surface.

Product Description and Features

Up to nine circumferential thermal zones on the embossing roller may be individually set and controlled. The master is an electroformed nickel sleeve provided by Carpe Diem which may be patterned or on which patterned shims maybe affixed. Especially good materials for embossing are Polycarbonate and Topas® Cyclic Olefin Copolymer.

All of the process parameters are set conveniently from Carpe Diem’s Human Machine Interface (HMI). They are reached by touching the graphic icon of the process on the visual machine. A pop-up menu provides the available parameters to be set or calibrated.

  • Qualified with food and pharmaceutical grade plastics
  • High speed, dependent on power in, out
  • No adhesion issues as with UV Polymers
  • Thermal shrinkage must be compensated

Thermal NIL Specifications

Imprint Force Up to 25kN
Max Heating Temperature Up to 200 °C
Max Heating Power 3600W
Min Cooling Temperature 40°C
Min Cooling Power 3600W(assumes process cooling water available)
Structure Size From <10 nm to millimeters
Optional sensor for splice detection Optional Camera
Rotary Encoder million count per revolution

 

Speed 4 in/min up to 800in/min (100mm/min up to 20000mm/min)
Web Width 6 in to 12 in (150mm to 300m)
Web Thickness 10μm up to 250μm
External Roll Diameter maximum 3in @ 6in web width
Web Tensile Stress Materials Typical 0.5-5lbs nominal tension
Materials PC,PMMA,PET,PS

Request More Information About The Thermal NIL Module

  • This field is for validation purposes and should be left unchanged.